Spar

Motor: Formerly known as Spar. 1/3 h.p., grease packed ball bearing, air-cooled, 110/60/1 (50Hz available)
Controls: The following controls are standard on all Globe (formerly Spar) Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, and thermal overload protection Cord and Plug: 6 ft. flexible three wire cord and ground prong.
Transmission: Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by direct linkage to the motor drive shaft. This design yields high-torque mixing power. Speeds: (Agitator rpm), (Hub rpmÆs)
1. Low Speed 106, 59
2. Intermediate Speed 196, 110
3. High Speed 358, 201
Bowls and Agitators: Standard equipment includes a 10Qt. high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
Attachments: Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
Finish: Top (transmission cover): metallic bronze epoxy enamel
Bottom: metallic gray epoxy enamel
Shipping Information:
Carton Size: Depth 24in.(60cm) Width 23in.(58cm) Height 37.8in.(96cm)
Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment. Includes spiral dough hook, mixing beater, and whip attachment.

Motor: 1/2 h.p., grease packed ball bearing, air-cooled, 110/60/1 (50Hz available)
Controls: Formerly known as Spar. The following controls are standard on these Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, and thermal overload protection
Cord and Plug: 6 ft. flexible three wire cord and ground prong. Transmission: Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by direct linkage to the motor drive shaft. This design yields high-torque mixing power. Speeds: (Agitator rpm), (Hub rpmÆs)
1. Low Speed 106, 59
2. Intermediate Speed 196, 110
3. High Speed 358, 201
Bowls and Agitators: Standard equipment includes a 20Qt. high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
Attachments: Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
Finish: Top (transmission cover): metallic bronze epoxy enamel
Bottom: metallic gray epoxy enamel
Shipping Information:
Carton Size: Depth 24in.(60cm) Width 23in.(58cm) Height 37.8in.(96cm)
Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment. Includes spiral dough hook, mixing beater, and whip attachment.

Motor: Formerly known as Spar. 3/4 h.p. (.5kW), grease packed ball bearing, air-cooled, 120/60/1 (50Hz available)Motor: 3/4 h.p. (.5kW), grease packed ball bearing, air-cooled, 120/60/1 (50Hz available)
Controls: Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all Globe (formerly known as Spar) Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection Cord and Plug: 6 ft. flexible three wire cord and ground prong.
Transmission: Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components. Speeds: (Agitator rpm)
1. Low Speed 102
2. Intermediate Speed 183
3. High Speed 352
Bowls and Agitators: Standard equipment includes a 25 Qt. (23L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
Attachments: Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
Finish: Top (transmission cover): metallic bronze epoxy enamel
Bottom: metallic gray epoxy enamel
Shipping Information:
Carton Size: Depth 24in.(61cm) Width 26.4in.(58cm) Height 40.2in.(102cm)
Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment.

Motor: 1 h.p. (.75kW), grease packed ball bearing, air-cooled, 115/60/1 (50Hz available)
Optional: 1 1/2 h.p. heavy duty compact pizza special 220/60/1
Controls: Formerly known as Spar. Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all these Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection Cord and Plug: 6 ft. flexible three wire cord and ground prong.
Transmission: Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components. Speeds: (Agitator rpm), (Slicer/Grinder rpm)
1. Low Speed 99, 69
2. Intermediate Speed 176, 123
3. High Speed 320, 224
Bowls and Agitators: Standard equipment includes a 31.7Qt. (30L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
Attachments: Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
Finish: Top (transmission cover): metallic bronze epoxy enamel
Bottom: metallic gray epoxy enamel
Shipping Information:
Carton Size: Depth 29in.(73cm) Width 29in.(73cm) Height 51in.(130cm)
Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment. Includes spiral dough hook, mixing beater, and whip attachment.

Motor: 12 h.p. (1.2kW), grease packed ball bearing, air-cooled, 208/60/1, 208/60/3, 220/60/1, 240/60/3 (50Hz available)
Controls: Mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all these Mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection Cord and Plug: Both single phase and three phase are hard wired
Transmission: Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components. Speeds: (Agitator rpm)
1. Low Speed 99
2. Intermediate Speed 176
3. High Speed 320
Bowls and Agitators: Standard equipment includes a 42.3Qt. (40L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
Attachments: Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
Finish: Top (transmission cover): metallic bronze epoxy enamel
Bottom: metallic gray epoxy enamel Shipping Information:
Carton Size: Depth 29in.(73cm) Width 25in.(63cm) Height 51in.(130cm) Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment. Includes spiral dough hook, mixing beater, and whip attachment.

Motor: Unique 3 h.p. (1.5kW) motor can handle a 50 lb. bag of flour, grease packed ball bearing, air-cooled, 208/60/1, 208/60/3, 220/60/1, 240/60/3 (50Hz available)
Controls: Globe mixer controls are front-mounted to give easy access in cramped kitchen environments. The following controls are standard on all these mixers: separate start and emergency stop buttons so operators can shut down the mixer immediately in an emergency situation, a 15-minute timer which shuts off the machine after set time has elapsed, and thermal overload protection
Cord and Plug: Both single phase and three phase are hard wired
Transmission: Heat-treated, hardened alloy, precision milled gears operate with planetary action. Gears are packed in a long-lasting, high pressure grease. Planetary gears are driven by an oversized cog-wheel, which is in turn driven by a cogged belt powered by the motor drive shaft. Cogged belt is a long-lasting, rugged fibre/rubber composite. This unique design yields high-torque mixing power while avoiding the high cost encountered repairing direct-drive transmission components. Speeds: (Agitator rpm), (Slicer/Grinder rpm)
1. Low Speed 99, 60
2. Intermediate Speed 176, 108
3. High Speed 320, 197
Bowls and Agitators: Standard equipment includes a 54.3Qt. (60L) high quality stainless steel bowl, dough hook, flat beater, and whip. A sturdy hand lever on the body column raises and lowers the bowl as well as locking in place at the top and bottom positions.
Attachments: Standard is the No. 12 hub for powering a standard size vegetable slicer/cheese shredder and a standard size meat mincer/grinder.
Finish: Top (transmission cover): metallic bronze epoxy enamel
Bottom: metallic gray epoxy enamel
Shipping Information:
Carton Size: Depth 35in.(88cm) Width 30in.(75cm) Height 59in.(149cm)
Cartons are affixed to an undersized skid (pallet), the weight and diminsions of this skid are not included above and may vary from shipment to shipment. Includes spiral dough hook, mixing beater, and whip attachment.

Formerly known as Spar. 18.5"L x 14.2"W x 26"H. 8 Quart stainless steel bowl with handle is convenient to handle mixing requirements of small batches in commercial kitchens. Standard planetary mixing action - agitator moves clockwise and shaft moves counterclockwise to reach every part of the bowl. This mixes all the ingredients thoroughly and ther is no need to rotate the bowl. Quick release safety guard/splash guard ensures safe operation. 4 rubber pads stabilize mixer. 3 speed steel gear driven transmission. Overload reset button. Strong cast aluminum base and column. NSF approved for commercial use. 110V. Digital timer: one minute increments allow for precision mixing and tone when batch is finished. 3 speed steel gear driven transmission and 1/4 horsepower motor; heavy-duty and high torque, designed for strength and durability even with heavy loads. Includes spiral dough hook, mixing beater, and whip attachment.