Commercial Faucets

Krowne commercial 8 inch center faucet for use on three compartment sinks. Wall mount, heavy duty with 14 inch swivel spout.

Royal Series from Krowne Metal. Heavy duty faucet with 14" swivel spout. 8" center wall mount. For use with three compartment sink.

Standard Heavy Duty Faucet from Krowne Metal. Wall mount with 8 inch center and 8 inch spout. Use with 1 compartment sinks. Available in a low-Lead compliant model to meet California AB-1953 and Vermont S152 standards.

Royal Series from Krowne Metal. Heavy duty faucet with 8" swivel spout. 8" center wall mount. Use with single compartment sink.

Standard Heavy Duty Faucet from Krowne Metal. Wall mount with 8 inch center and 12 inch spout. Use with most two compartment sinks.

Royal Series Heavy Duty Faucet from Krowne Metal. Wall mount with 8 inch center and 12 inch spout. Use with most two compartment sinks.

Glass filler from Krowne Metal. Continuous On position with adjustable flow. 8" high from deck to spout tip. Fits 7/8" hole opening. 1/2" NPS male outlet.

Water Station from Krowne Metal. Features continuous On position. Adjustable flow. Heavy duty stainless steel wire grid. Glass filler faucet and drain includeds. Fits 11" x 13" cutout with 1" radius corners.

Add-On Faucet with 12" spout allows you to use faucet with existing pre-rinse assembly. Interchangeable with T&S Brass and Encore fixtures. New style allows knob to be easily turned on and off without obstruction.

Chrome-plated bronze service faucet with vacuum breaker, integral stops, adjustable wall brace, pail hook, four-arm hot and cold handles and 3/4" hose thread on spout. Water inlets are for 1/2" pipe and are eccentric on an 8" centerline. Center of spout outlet from back of wall flange is 8". Mounts to wall.

Royal Series Wall Mount Pre-Rinse Assembly With Wall Bracket. Pre-assembled to cut installation time. 1/2" NPT Female Inlets on 8" centers. Internal check valves. 35" high with 15" overhang. Chrome plated brass. Includes wall bracket. Available in a low-Lead compliant model (17-108WL) to meet California AB-1953 and Vermont S152 standards.

Krowne Royal Pre-Rinse assembly with wall bracket and add-on faucet. Wall-mounted unit with 8" centers and 12" add-on spout. Available in a Low-Lead Compliant model that meets California AB-1953 and Vermont S152 standards.

Royal Pre-Rinse assembly with wall bracket. Deck-mounted with double pantry valve. Spring action flexible gooseneck, 38" high w/14" overhang. Internal check valves, 1/4" NPT male inlets. NSF, CSA approved. Available in a low-Lead compliant model (17-202WL) to meet California AB-1953 and Vermont S152 standards.

Royal pre-rinse assembly with wall bracket. Deck-mounted on 4" centers with spring action flexible gooseneck. 38" high with 14" overhang and internal check valves. 1/2" NPT male inlets. NSF, CSA approved. Available in a Low-Lead Compliant model that meets California AB-1953 and Vermont S152 standards.

Krowne Royal pre-rinse assembly with wall bracket. Deck-mounted, 8" centers with spring action flexible gooseneck. 35" high w/15" overhang and internal check valves. 1/2" NPT male inlets. NSF, CSA approved. Available in a Low-Lead Compliant model that meets California AB-1953 and Vermont S152 standards.

Fisher Pre-Rinse Unit with 8 inch backsplash mount, spring action flexible gooseneck, and EZ-Install kit for easy replacement. Polished chrome. Dual controls with Ultra Spray valve, wall bracket.

The Royal Pre-Rinse Flex Hose from Krowne Royal, 44 inches with grip.

Deck mounted faucet with 6" extended "D" spout. Installs 4" on center. Includes wrist handles.

Faucet with 4" on center splash mount design. Includes wrist handles.

Water Saver Spray Head from Krowne Royal. 1.6 gpm at 60 psi flow rate, Complies with EPAct 2005.

Cold water. Commercial 4" and 8" center wall and deck faucet repair kit. Fits all Royal Series Faucets from Krowne Metal. Also interchangeable with T&S Brass, Encore and Dormont. Fully assembled, easy to install. Includes handle.

Hot water. Commercial 4" and 8" center wall and deck faucet repair kit. Fits all Royal Series Faucets from Krowne Metal. Also interchangeable with T&S Brass, Encore and Dormont. Fully assembled, easy to install. Includes handle.

Contains two each; Sterns, seats, seat washers, washer screws, spout o-rings, stern o-rings, bonnets, handles and handle screws. Fits Krowne standard heavy duty wall mount faucets.

For 3 1/2" sink opening. Stainless steel with metal post. Locknut and washer included. 4 1/2" top diameter. For use with all one, two and three bay free-standing sinks on our site (excluding bar sinks).

Wrist Handles Only. Fits Advance Tabco splash mounted hand sink faucets.

2 inch NPS Drain Outlet. 3 1/2 inch sink opening. 4-1/8" flange diameter. Stainless steel strainer, flange, and handle. Nickel plated bronze body.

Wrist Blade Kit for Krowne hand sinks.

Fisher Pre-Rinse Unit with swing spout and EZ-Install kit for easy replacement. 8 inch backsplash mount. Available with 8, 12 or 14 inch swing spout. Heavy duty stainless steel construction.