APW XWav EZ II Pass-Thru Electric Conveyor Toaster

APW XWav EZ II Pass-Thru Electric Conveyor Toaster

Ships Free to USA*!

  • Manufacturer: APW
  • Manufacturer Model Number XWAV1422EZ-SS
  • apw-wyott
  • *Free Shipping to a commercial address in the Continental U.S.


Specify Voltage:


The APW XWav EX II Pass-Thru Electric Conveyor Toaster uses a series of cutting edge controls and infrared heat systems that are focused at your food, delivering an "extreme" level of heat energy for broiling, toasting, baking and warming. Adjustable product entry and exit openings from 1" to 3-7/8", and a 14" wide non-corrosive steel conveyor belt. A programmable Solid State Digital Control has 99 menu options that automatically adjusts the heat settings, both top and bottom, and the conveyor speed. Hot toasted sandwiches in 45 seconds, perfect pizza in 5-8 mintues!

No rating yet... Be the first to rate this product!


  • 14" deep cooking chamber
  • XWAV-EZ cooking control system utilizes a programmable Solid State Digital Control that has 99 menu options
  • Choosing a menu option will automatically adjust the heat settings, both top and bottom, and the conveyor speed
  • The XWAV ceramic heat system has over 31% more efficiency in its InfraRed Energy vs. Quartz based units
  • The XWAV heat system is a concentrated, focused source of radiant energy that consistently sends InfraRed evenly toward the conveyor belt at both high and low temperature levels- InfraRed efficiency is 96%!
  • Conveyor speed can be set between speeds that are slow (12 minutes) to a maximum speed of 30 seconds
  • Conveyor direction can be reversed with switch on side of conveyor
  • Crumb trays are provided on either end of the toaster
  • An extended conveyor shelf is supplied for “exit” area, which allows easy off-loading of products
  • Fully insulated top and sides provide “Cool to the Touch” exteriors
  • Thermostatically controlled fan keeps exterior surface cool, even when unit is turned off
  • XWAV control panel is recessed vs. the “exposed” control panel on the competition, which reduces inadvertent bumps on control knobs that change the performance speed or temperature
  • XWAV Ceramic heaters are made of a stronger material that maintains a moderate material temperature, last significantly longer than Quartz Elements and do not have the issue of shattered glass in your operation
  • Bottom heat is provided by a calrod element that can easily handle drippings and grease, competitive units use quartz elements that can shatter with grease drippings
  • Brushless DC conveyor motor is long lasting
  • Top heat - 2100 Watt ceramic infrared heat system
  • Bottom heat - 3400 Watt calrod element
  • Programmable menu options in digital solid state control system
  • Thermostatically controlled cooling fan system
  • Conveyor belt direction switch to reverse flow of food
  • Product entry and exit chamber doors, adjustable to 3 7/8” high
  • Removable entry and exit shelves that extend from the end of the conveyor
  • Removable crumb trays
  • External top, back, sides and base are made of 18 gauge stainless steel
  • Front control side is made of high temperature polycarbonate material
  • Non-corrosive steel conveyor wire belt
  • Internal Chamber is made of 18 gauge Stainless Steel
  • 4” High Temperature Polycarbonate and steel legs
  • High temperature insulation used around cooking chambers
  • UL listed, UL Sanitation, and Canadian UL approved.
  • 4" adjustable legs
  • 1 phase electric, 60 Hz, 5500 Watts
  • Available in 208V / 26 amps or 240V / 23 amps
  • 18.000"H x 14.000"W x 25.500"D