APW XWav EZ II Pass-Thru Electric Conveyor Oven

APW XWav EZ II Pass-Thru Electric Conveyor Oven

Ships Free to USA*!

  • Manufacturer: APW
  • Manufacturer Model Number XWAV1422EZ
  • apw-wyott
  • *Free Shipping to a commercial address in the Continental U.S.

$3,597.00

Specify Voltage:

OUT OF STOCK

The APW XWav EX II Pass-Thru Electric Conveyor Oven has adjustable product entry and exit openings from 1" to 3-7/8", and a 14"W non-corrosive steel conveyor belt. Features a programmable Solid State Digital Control with 99 menu options that automatically adjusts the heat settings, both top and bottom, and the conveyor speed. Over 31% more efficiency in its infraRed energy vs. quartz based units!

No rating yet... Be the first to rate this product!

Features:

  • 14" deep cooking chamber
  • XWAV-EZ cooking control system utilizes a programmable Solid State Digital Control that has 99 menu options
  • Choosing a menu option will automatically adjust the heat settings, both top and bottom, and the conveyor speed
  • The XWAV ceramic heat system has over 31% more efficiency in its InfraRed Energy vs. Quartz based units
  • The XWAV heat system is a concentrated, focused source of radiant energy that consistently sends InfraRed evenly toward the conveyor belt at both high and low temperature levels- InfraRed efficiency is 96%!
  • Conveyor speed can be set between speeds that are slow (12 minutes) to a maximum speed of 30 seconds
  • Conveyor direction can be reversed with switch on side of conveyor
  • Crumb trays are provided on either end of the toaster
  • An extended conveyor shelf is supplied for “exit” area, which allows easy off-loading of products
  • Fully insulated top and sides provide “Cool to the Touch” exteriors
  • Thermostatically controlled fan keeps exterior surface cool, even when unit is turned off
  • XWAV control panel is recessed vs. the “exposed” control panel on the competition, which reduces inadvertent bumps on control knobs that change the performance speed or temperature
  • XWAV Ceramic heaters are made of a stronger material that maintains a moderate material temperature, last significantly longer than Quartz Elements and do not have the issue of shattered glass in your operation
  • Bottom heat is provided by a calrod element that can easily handle drippings and grease, competitive units use quartz elements that can shatter with grease drippings
  • Brushless DC conveyor motor is long lasting
  • Top heat - 2100 Watt ceramic infrared heat system
  • Bottom heat - 3400 Watt calrod element
  • Programmable menu options in digital solid state control system
  • Thermostatically controlled cooling fan system
  • Conveyor belt direction switch to reverse flow of food
  • Product entry and exit chamber doors, adjustable to 3 7/8” high
  • Removable entry and exit shelves that extend from the end of the conveyor
  • Removable crumb trays
  • External top, back, sides and base are made of 18 gauge stainless steel
  • Front control side is made of high temperature polycarbonate material
  • Non-corrosive steel conveyor wire belt
  • Internal Chamber is made of 18 gauge Stainless Steel
  • 4” High Temperature Polycarbonate and steel legs
  • High temperature insulation used around cooking chambers
  • UL listed, UL Sanitation, and Canadian UL approved.
  • 4" adjustable legs
  • 1 phase electric, 60 Hz, 5500 Watts
  • Available in 208V / 26 amps or 240V / 23 amps
  • 18"H x 43"W